BioborŽ JF Benefits: BioborŽ JF is a liquid fuel additive that combats fungus and other microtive life in hydrocarbon fuels, such as diesel and jet fuels, but is also effective in light oils and transmission fluid. BioborŽ JF eliminates growth of harmful slime-producing fungi that clog filters and pipelines, attack rubber fuel system components and whose waste products aid in the corrosion of metal surfaces. BioborŽ JF is simple to use and harmless to the wide variety of fuel system parts, top coatings, sealants and elastomeric materials tested. It does not adversely affect fuel performance in engines. BioborŽ JF is an effective microbiocide because of its equilibrium solubility in both fuel and water under conditions of fuel storage. Applications: BioborŽ JF is used by a large number of aircraft manufacturers, airlines, marines, trucking fleets, railroads, bulk storage terminals, fuel suppliers and by other users of hydrocarbon fuels and oils exposed to the possibility of contamination by fungus and bacteria. Treatment Procedures: If a system is badly contaminated, drain water bottoms. Water bottoms in storage tanks should be kept to a minimum. Good housekeeping is important in treating slime problems, but it is not a cure. BioborŽ JF is used at 270 ppm in fuel to effect sterilization, and subsequently at 135 ppm to maintain fungus-free fuel. Ideally, BioborŽ JF should be metered. However, in the absence of metering equipment, BioborŽ JF may be manually batch-blended. If batch-blended, as in tank trucks or small aircraft wing tanks, BioborŽ JF should be introduced while the tank is being filled and after the tank is approximately ˝ full. This will ensure faster and more complete dispersion. Container Sizes and Dosage Rates: BioborŽ JF is available in 8 oz, and 16 oz. Easy Squeeze containers, designed to dispense the exact measure every time, along with one quart cans, 5 gal. pails and 55 gal. drums. To calculate the number of ounces of BioborŽ JF needed for diesel fuel only multiply YOUR gallons of fuel x 7.08 and then x .004 for initial treatment then x .002 for maintenance treatments. Example 100 gallons of fuel x 7.08=708 x .004=2.83 ounces are needed for initial shock treatment then half of that there after to maintain the tank. Storage and Handling: All BioborŽ JF containers must be kept closed from the atmosphere. Protect BioborŽ JF from any water contamination. BioborŽ JF is classified as a flammable and is shipped as a FLAMMABLE LIQUID N.O.S. (NAPHTHA) UN 1993, Class 3.3, PG III Sold in full case quantities only. Made in USA. | Item | Price | Buy Now | | BioborŽ JF - 12 each 8 ounce bottles treats 6600 gallons of fuel | $219.00 delivered | | | BioborŽ JF - 6 each 32 ounce bottles treats 13,200 gallons of fuel | $359.00 delivered | | BioborŽ JF - 4 each 1 gallon jugs.
1 gallon treats 8700 gallons of fuel for maintenance. Requires two gallons for initial shock. | $675.00 delivered | | |
