Industrial, Agricultural, and Mining
Oil Purification to 1 micron
 
Centrifuges for: Engine Oil, Vacuum Pumps, Gear Boxes, Waste Oil Non-engine Lubrication Applications 
These centrifuge systems will at least double oil change intervals. Centrifuges have over 5 times the debris-holding capacity of any filters on the market. "Why?" you ask. Because the centrifuge removes contaminants from the oil flow all together. Filters take out solids and hold them from circulating further but plug and reduce oil flow and eventually reach the point of not working. The cleaning efficiency remains constant in a centrifuge where in a filter it drops off as the filter plugs.

For these engines and many more:

CAT 3500 Series Engines
Cummins KTA38M2 1200 HP
Cummins KTA50M2 1600 HP
Cummins QSK38M 1300 HP
Cummins QSK19M 750 HP
Cummins KTA19M3 640 HP
John Deere 6125 350 HP
John Deere 4045T 105 HP
John Deere 6068T 155 HP

Get a Quote for International or from Corporate Office
Call  or click to email 530 613 2150
 
Get a Quote in Pacific Northwestern States   
Call  or click to email 541-221-3599
Get a Quote in Eastern States    
Call  or click to email 772-215-8087 
Get a Quote in Gulf Coast States
Call  or click to email 337-277-5417
 
Latest Example of huge cost savings:Kinney and Stokes 412 vacuum pumps

These pumps were being rebuilt every three months. Now with the Dieselcraft OC-50 centrifuge installed, they are rebuilding these vacuum pumps once every year and a half.

The average rebuild for a Stokes 412 vacuum pump is $8000. Based on your plants rebuild sequence, you can quickly see how much savings you will achieve by extending your rebuild out to over a year.

Kit for Stokes Vacuum Pump

Kit Includes:
One OC-50 Dieselcraft Centrifuge / Control Valve/ Pressure Gauge / Mounting Plate
One Oil Pump & Motor / 8ft. 3/8 hose and fittings. Pump rated continuous duty.
One Motor power cord and switch. 20 ft. HD 14/3 cord with molded plug and industrial quality switch.

Download Centrifuge Data Sheet

Get a Quote for International or from Corporate Office
Call  or click to email 530 613 2150
Get a Quote in Pacific Northwestern States    
Call  or click to email 541-221-3599  
Get a Quote in Eastern States     
Call  or click to email 772-215-8087  
Get a Quote in Gulf Coast States 
Call  or click to email 337-277-5417 
 

 

Model OC-25 Bypass oil cleaning for internal combustion engines

These are the ONLY systems that are plug and play for the pick up truck to class 6 truck market.

Download Centrifuge Data Sheet

Get a Quote for International or from Corporate Office
Call  or click to email 530 613 2150
Get a Quote in Pacific Northwestern States    
Call  or click to email 541-221-3599  
Get a Quote in Eastern States     
Call  or click to email 772-215-8087  
Get a Quote in Gulf Coast States 
Call  or click to email 337-277-5417 
Model OC-50

For engine applications as well as for stand alone and in line industrial systems.

Flow rate: 1.8 GPM or 108 gallons per hour

Measures 5.4" Diameter by 9.8" Tall

Supplied with universal mounting plate is 6" wide x 6" long with a radius to match the inside of a 55 gallon open head drum. With 1 1/4 NPT female thread for affixing the return line or can be used to mount the plate with the use of a threaded nipple.

Rotor holding capacity: 20 oz of contamination.

Download Centrifuge Data Sheet

Model 250

Flow rate: 2.5 GPM or 150 gallons per hour

2.5 GPM for stand alone and off line systems For large diesel engine applications as well as for stand alone and in line industrial systems.

Download Centrifuge Data Sheet

Model 500

5 GPM for stand alone and in line industrial systems.

Can be engine mounted.

Download Centrifuge Data Sheet

Get a Quote for International or from Corporate Office
Call  or click to email 530 613 2150

Get a Quote in Pacific Northwestern States    
Call  or click to email 541-221-3599  
Get a Quote in Eastern States     
Call  or click to email 772-215-8087  
Get a Quote in Gulf Coast States 
Call  or click to email 337-277-5417 
 
Model 1800 Centrifuge

13 GPM for stand alone and in line industrial systems.

Download Centrifuge Data Sheet
 

Magnum CFC 1000 Continuous Flow Centrifuge

This unit is fully programmable and self cleaning.

Motor is 3 hp 220 volt single phase
Rated for continuous duty.
Designed to run 24/7 with out anyone in attendance.
Timers are very simple to operate. Set it and forget it.

Liquid is put through the top via a ½ NPT hole and out via a 2" NPT port. The bowl spins at 4000 RPM and generates 3000 "G's"

Will clean the following and more:
Engine Oil:
Biodiesel and feed stocks
Grape Juice/Wine:
Gold and Silver Recovery:
Machine/Grinding Coolant
Waste Water:

For more information see our sister site www.centrifugeprocessing.com

Get a Quote for International or from Corporate Office
Call  or click to email 530 613 2150

Get a Quote in Pacific Northwestern States    
Call  or click to email 541-221-3599  
Get a Quote in Eastern States     
Call  or click to email 772-215-8087  
Get a Quote in Gulf Coast States 
Call  or click to email 337-277-5417 
Waste Oil Recovery and Purification System Fuel Factory 2011.1 and Lubrication Station

The system is a set of precision centrifuges driven by an industrial duty gear pump that can run continuous with out a problem.

It will supply 50 finished gallons of processed oil or fuel per hour.

The system will clean any waste motor oil, transmission fluid, hydraulic fluid or vegetable oil without any filters. Also will clean dirty diesel fuel.

Measures 22.5 inches in diameter to fit inside an "open top" 55 gallon drum.

This is a complete plug and play industrial system.

Get a Quote in Pacific Northwestern States    
Call  or click to email 541-221-3599  
Get a Quote in Eastern States     
Call  or click to email 772-215-8087  
Get a Quote in Gulf Coast States 
Call  or click to email 337-277-5417 
Get a Quote for International or from Corporate Office
Call  or click to email 530 613 2150

 

Fuel Purifier Facts

If a purifier is not matched to the fuel flow you get nothing but more bad fuel and the probem is not solved

All purifier designs undergo velocity magnitude simulations.  

The illustration shows the speed of the fluid as it goes through the purifier. Red is fast and blue is slow. This shows how the diesel slows down by the time it goes through the inside tube length Thereby giving enough time for the water to separate from the fuel.

Diesel Fuel Purifiers

See the Separator-Purifier Demo Video

This separator is based on surface tension principle. Since diesel and water have different surface tension as well as density, when a mixture of diesel and water is spread over a large area water droplets and large solids will separate from the fuel.

In fuel water separation, the larger the surface area the better. Dieselcraft separators are engineered for maximum "residence time" based on flow rate. Residence time is a broadly useful concept that expresses how fast something moves through a system in equilibrium. The longer the residence time the better the cleaning.

Dieselcraft utilizes matched flow rate to surface area and activated alumina to get the water to agglomerate and drop out of the fuel.

All purifiers are supplied with a water sensors and the needed mounting hardware.

If you have a special fuel transfer application call us.

Get a Quote in Pacific Northwestern States    
Call  or click to email 541-221-3599  
Get a Quote in Eastern States     
Call  or click to email 772-215-8087  
Get a Quote in Gulf Coast States 
Call  or click to email 337-277-5417 
Get a Quote for International or from Corporate Office
Call  or click to email 530 613 2150
 
Heady Duty Tank Cleaning Sytem Model FPS-PW

There is no other tank cleaning system on the market that compares to Dieselcraft. This tank cleaning system is designed with a high pressure high flow pump and uses a tank cleaning spray nozzle that cleans 360° of all inside tanks surfaces by pumping a cleaning agent at high pressure to remove solids from the tanks walls..

Regardless if the tank is above ground in-ground are on board a vehicle this will clean the tank better than any other system available.

Transfer Flow Rate 37 GPM

Filter Rate 33 GPM

Pressure Cleaning Rate 30 GPM @ 75PSI

Maximum Tank Diameter 18 Feet

Dimensions 37” wide x 45” deep x 41” tall.

Particle Filtration to 10 microns standard.

Suction and Discharge Hoses Included.

120/220 volt 50-60HZ 1.5 HP

Weight 570 lbs.

Fuel Polishing Systems

Model #FPS-400 Mobile Fuel Polishing System
The economically priced system for the small to medium sized jobs.

7 GPM Heavy Duty vane pump.  
Removes over 95% of water and large contamination in fuel.
Anti-asphaltenes fuel conditioning
Absolute practical filtration to 10 microns standard
2 each 10 foot suction and discharge hoses included
Digital flow meter
Water Sensor to tell you to drain the purifier.
120 volt motor
Weight – 140 lbs

Models available to 25 GPM 120 volt and 12 volt 10 GPM

Get a Quote in Pacific Northwestern States    
Call  or click to email 541-221-3599  
Get a Quote in Eastern States     
Call  or click to email 772-215-8087  
Get a Quote in Gulf Coast States 
Call  or click to email 337-277-5417 
Get a Quote for International or from Corporate Office
Call  or click to email 530 613 2150
Fuel Test Kits

Fuel Related Tools

Part # DS-1

This is an inexpensive test anyone can perform. One side of the slide will detect BACTERIA The other side of the slide will detect MOLD. Simply dip the slide into the fuel from the fuel filter. Put it pack into the supplied tube and wait 24-36 hours NO spots are good news. Any reaction is bad news.

DS-1
Water sensor for separators 12/24 VOLT

The alarm turns on a light and sound an audible buzzer when water in present in fuel

Model # 06-5 Detects water in fuel and work in conjunction with purifiers or can be installed separately.

Model #06-6SP with additional output for alarm or PLC controls

 

Hand Held Water Detector 


Part #FWS-HH

Same as 06-5 but completely portable

Features Probe, Extension Cable and ABS electronic enclosure Standard cable length to meet any tank need, 5 foot, 10 foot, or 15 foot 
Easy-to-use 
100 hour battery life 
Rugged Carrying Case
Special cable lengths are available.

Tank Cleaner and Fuel Additives

Technol® 246 Fuel Tank Cleaner
Have you been using a biocide religiously and it's just not working?

Here is why. A bio-film has formed that is an agglomeration of microorganisms in which cells adhere to each other on the tank surface or at the fuel water interface. These adherent cells are surrounded by shield of extra cellular polymeric substance (EPS). EPS constitutes 50% to 90% of a bio-film's total organic matter….this bio-film also know as sludge and also known as what a lot of people refer to as algae protects the bacteria from the biocides.

Technol 246 is formulated to break up the sludge and clean fuel tanks that have not been on a regular maintenance program or tanks that have been contaminated with large amounts of sludge.
 

 

Technol 246
12 ea 8 oz bottles $159.00 USD4 ea 1 gallon jugs $310.00 USD1 ea 5 gallon pail $305.00 USD

Technol® 403 Diesel Fuel Conditioner with Cetane 
Is a premium performance, warm-weather multi-purpose diesel fuel improver which can increase fuel Cetane by up to 3 numbers and improve mileage

TECHNOL 403M is best for diesel particulate filters. This Catalyst is EPA-registered and accepted for use by MSHA. It is an advanced multifunctional diesel additive containing a metallic combustion catalyst. This product provides for reliable regeneration performance of diesel particulate filters (DPF), while maintaining fuel efficiency.

Consistent and continued use of this product will enable the proper maintenance of diesel particulate emission control and system performance, improve power and fuel efficiency and lubricity.
 

Get a Quote for International or from Corporate Office
Call  or click to email 530 613 2150

Get a Quote in Pacific Northwestern States    
Call  or click to email 541-221-3599  
Get a Quote in Eastern States     
Call  or click to email 772-215-8087  
Get a Quote in Gulf Coast States 
Call  or click to email 337-277-5417 
Engineering Services

Licensed mechanical professional engineer specialized in thermal and mechanical systems with experience serving in design, process and project engineering roles in the energy and marine sectors. Strong background in pressure vessel, tank and boiler design by rule and by analysis, Heat and Mass Balance, FEA and CFD, and 3D modeling and drafting.

Our certified enginnering service can develope a process for any application from CAD drawings to proposals to manufacturing.

Dieselcraft @ 2015
Powered by ERIGO