Hydrophilic coalescer membranes do attract water and allow diesel to pass, causing droplets to merge and fall out by gravity.

But they only remove free and emulsified water — not dissolved water.

The widely advertised “99.99% water removal” is a marketing claim, not a field verified spec.

Actual published data shows:

•             99.5% single pass removal at 5 microns

•             Efficiency drops sharply with:

•             Biodiesel blends (B20 holds 3–4× more dissolved water than B5)

•             Surfactants in ULSD and additives

•             Microbial byproducts

•             High solids loads

Because biodiesel is hygroscopic and modern diesel contains surfactants, 99.99% is only achievable in ideal lab fuel, not real world diesel.

Why Dieselcraft Outperforms Coalescers

Proprietary Media (Unique Advantage)

Dieselcraft is the only purifier using a proprietary media bed engineered to:

•             Break water out of suspension

•             Capture heavy solids

•             Stabilize flow

•             Increase separation efficiency

This media:

•             Is not a filter

•             Does not plug

•             Never needs replacement

No coalescer or filter system offers an equivalent mechanism.

Immune to Coalescer Failure Modes

Coalescers fail when exposed to:

•             Surfactants in ULSD

•             Biodiesel blends

•             Additives

•             Microbial growth

•             High particulate loads

Dieselcraft’s purifier is unaffected by all of these.

It maintains performance in real‑world diesel, not just clean test fuel.

Consistent, Long Term Performance

Coalescers degrade as:

•             Elements load

•             Membranes saturate

•             Flow changes

•             Additives reduce coalescing

Dieselcraft remains stable because:

•             No media to saturate

•             No element to plug

•             No chemical sensitivity

•             No flow dependent coalescing behavior

It performs the same on day 1 and day 1,000.

Bottom Line

The Dieselcraft Fuel Purifier is superior because it is:

•             Filter less

•             Low maintenance

•             Highly efficient

•             Unaffected by modern diesel chemistry

•             Designed for realm world contamination

•             Proven to reduce engine wear and extend service intervals

It is the only purifier combining mechanical separation with a proprietary media bed, delivering unmatched reliability and performance. MORE INFO

The post Coalescer Technology: What Works and What Fails in the Field appeared first on Dieselcraft.

What It Is

• A water‑absorbing insert designed for diesel tanks in vehicles, generators, boats, RVs, farm equipment, and storage tanks.
• Typically shaped like a pouch, sock, or small cylinder.
• Made from super‑absorbent polymers that selectively absorb water — not diesel fuel.
• Includes a retrieval cord so it can be easily removed and inspected.
• Must be checked periodically and replaced once saturated.

How It Works
Water naturally accumulates in diesel tanks through:

• Condensation
• Contaminated fuel deliveries
• Long‑term storage
  Once placed in the tank:

1. The absorber sinks to the bottom where water collects.
2. It pulls in and traps free water molecules.
3. When it reaches its rated capacity (e.g., 7.2 oz), it stops absorbing.
4. You remove it, discard it, and replace it with a fresh one.

Why It Matters
Water in diesel can lead to:

• Injector damage
• Microbial growth (“diesel algae”)
• Rust and corrosion inside tanks
• Hard starts, rough running, or power loss
• Fuel filter clogging
  A water absorber helps prevent these issues without adding chemicals to your fuel.

Typical Use Cases

• Long‑term storage tanks
• Backup generators
• Boats and RVs
• Farm equipment
• Diesel trucks that sit unused for extended periods

How to Use It

1. Drop the absorber into the tank through the filler neck.
2. Make sure the retrieval cord stays accessible.
3. Leave it in place during storage or operation.
4. Check periodically and replace when saturated.

More info at

The post Diesel Tank Water Absorbers: Protect Your Fuel and Engine appeared first on Dieselcraft.