50%.

MORE INFO

The post Cleanable Oil Filtration for Cummins 855 & KTA19 Engines appeared first on Dieselcraft.

Oil filters are designed to trap contaminants like dirt, soot, and wear metals circulating in your engine. Higher-quality filters can capture smaller particles and perform better over time. That raises a common question: what is the best oil filter—and does it really make a difference?

Here’s the reality: all oil filters are limited by design.

They trap contamination—they don’t remove it from the system.

Over time, as contaminants build up, the filter becomes saturated. Once that happens, several things can occur:

• Reduced oil flow
• Bypass valve opening (allowing unfiltered oil through)
• Continued circulation of ultra-fine particles that filters can’t capture

Even the best full-flow oil filters cannot effectively remove the smallest and most damaging contaminants—particularly soot and microscopic wear metals. These particles continue to circulate, contributing to ongoing engine wear.

The Key Problem: Contamination Stays in the Oil

Traditional filtration systems separate particles only down to a certain size. Anything smaller remains suspended in the oil, effectively turning it into a mild abrasive over time. This is one of the primary causes of:

• Premature engine wear
• Reduced efficiency
• Shortened oil life

The Solution: Remove, Don’t Just Trap

To truly protect your engine, contamination must be removed from the oil—not just captured temporarily.

That’s where bypass centrifuge technology comes in.

A centrifuge works differently than a filter. Instead of relying on a physical barrier, it uses high-speed rotation to separate contaminants based on density. This allows it to remove:

• Ultra-fine soot
• Water
• Wear metals
• Sludge and varnish precursors

The result is continuously cleaned oil, significantly reduced engine wear, and extended oil life.

Why It Matters

Relying on standard oil filters alone means accepting a system where contamination steadily accumulates. Incorporating a centrifuge-based oil cleaning system transforms your maintenance approach from reactive to proactive—helping prevent costly failures and downtime.

Learn more about how centrifuge-based oil cleaning systems work and how they can protect your equipment:

• http://dieselcraft.com/industrial-agricultural-and-mining/

Bottom line: Oil filters play a role—but they’re not a complete solution. If your goal is maximum engine life and reliability, removing contamination—not just trapping it—is the real answer.

The post Oil filters do not work to save your engine. appeared first on Dieselcraft.