Portable Fuel Polishing

Basic Economy Fuel Polishing System for $479

  • 16 GPM 120 Volt Vane Pump
  • Hand Carry Handle
  • 5 Micron Filter
  • Filter Head with Pressure Gauge
  • Stainless Steel Fittings
  • Hose end suction strainer to protect the pump
  • 20 feet PVC Hose: To be cut by you to fit the job.

14 GPM Portable Diesel Filter System
Model FPSP14-12V. Under $2500

Learn More

Heavy Duty Portable Fuel Polishing

  • 420 GPH subject to distance from the source.
  • 115 volt motor with 7 GPM Pump.
  • Filter-less Purifier to removes over 99% of water and large contamination in fuel without filters.
  • Secondary absolute practical filtration to 10 microns standard.
    12 each filters included. Takes standard buy anywhere spin on filters.
  • Water/Debris alarm to indicate time to drain the purifier.
  • 2 each 20 foot suction and discharge hoses included.
  • Magnetic Fuel Conditioning.
  • Digital flow meter.

Stainless Steel Wall Mount Fuel Polishing

The FPS-400S is a modular tank cleaning and fuel polishing system designed for the transfer and/or re-circulating/ polishing of diesel fuel in storage tanks.

The base system utilizes a 7 gallon per minute continuous duty pump in conjunction with a Dieselcraft 5×24 purifier plus a 10 micron spin on filter.

Assembled with all Grade 8 fasteners on the 430 stainless steel backing plate and drip pan.

NOT FOR USE WITH GASOLINE

• Includes:

420 GPH subject to distance from the source.
• 115 volt motor with 7 GPM Pump.
• Filter-less Purifier to removes over 99% of water and large contamination in fuel without filters.
• Secondary absolute practical filtration to 10 microns standard.
10 each filters included. Takes standard buy anywhere spin on filters.
• Water/Debris alarm to indicate time to drain the purifier.
• Magnetic Fuel Conditioning.
• Digital flow meter.
• Flehtral GH-16 Hose
• Meets or exceeds the requirements of SAE 100R1AT and EN853
• DIN 20022 1SN-ISO 1436 Type 1.
• Tube: Synthetic Rubber
• Reinforcement: One braid of high tensile steel wire
• Cover: Blue Perforated, oil, abrasion and weather resistant synthetic rubber, MSHA approved
• Temperature: -40°F to 302°F, except for air 250°F max

The Tank Dryer

Add this to mop water up! Simple and easy to use! The Tank Dryer is a fuel tank water absorber, which has been developed in response to the increasing concerns regarding water contamination of fuel.

BUY NOW

Get the water out of a small amount of fuel.
Mr. Funnel AF8CB Fuel Filter is the answer.

5.0 out of 5 stars Lifesaver
This thing is great. I had three gas cans tipped over during hurricane Ian, and they all became contaminated. I didn’t know what to do and then searching YouTube. I found this funnel. It worked great! I had no idea. I was worried about what I was going to do with all that contaminated gasoline and I couldn’t use my gas cans in the meantime. This was worth every penny.

BUY NOW

STAR BRITE Star Tron Fuel Tank Cleaner – Remove Sludge, Varnish & Other Deposits – Rejuvanate Old, Stale Fuel – Concentrated Formula Works In Gas Tanks & Diesel Tanks – 64 OZ (093664) , blue
Buy Now at https://amzn.to/4jhKsn1

Star Tron Super Concentrated Diesel Formula – Enzyme Fuel Treatment for Enhanced Engine Performance – 1 Oz Treats 32 Gallons – Stabilize & Rejuvenate Diesel, Biodiesel & All Regular Gasoline.

Buy now at https://amzn.to/43jaG2s

For BLACK DIESEL and WVO we are the experts

For recycling and reuse of waste oil for fuel additives

55g Drum Perforated Steel Collection Lid

Oil collection lid for 55 gallon drums

Buy Now

This Drum Collection Lid fits a standard 23 5/8″ outside diameter steel drum and designed to keep weather and thieves away from the contents of your drum. The 16 gauge drum lid has a 14 gauge welded metal collection box; OD 12” x 12” x 5” deep which provides plenty of room to easily pour into. 11 gauge 1/2″ perforated steel is welded in the bottom of the collection box.

The 1/2″ round holes are large enough for easy pouring without splashing or clogging yet small enough to filter out larger objects and deter theft. The perforated steel sits approximately 1 3/8″ below the top of the drum to prevent overfilling.
The lid is designed to stay open while pouring but a slight breeze can close the lid if accidentally left open.